Rat_Fink
New Member
Machine is approx 4 years old and has worked flawlessly up until about 2 weeks ago when I noticed solid black was not quite as black as before.
Did a nozzle check and noticed that 1 of the 2 black "blocks" of nozzles were approx 75% gone (the other "block" of black was near perfect).
Al other colors are checking near 100%.
I did a head soak and got the black to almost near perfect once again. Printed for about a week and it started happening again.
Verified Maintenance Station was getting a good seal with ink flowing out of the waste tubes so I changed dampers.
I'm to the point where I want to upgrade - so this machine is up for sale.
May just need a more aggressive cleaning, but may be the head.
Other than the above issue - this machine has been 100% perfect!
$2400 - OBO
South Bend, IN area (approx 1½ hours from Chicago).
info@pwcgraphics.com
574-298-8344
Did a nozzle check and noticed that 1 of the 2 black "blocks" of nozzles were approx 75% gone (the other "block" of black was near perfect).
Al other colors are checking near 100%.
I did a head soak and got the black to almost near perfect once again. Printed for about a week and it started happening again.
Verified Maintenance Station was getting a good seal with ink flowing out of the waste tubes so I changed dampers.
I'm to the point where I want to upgrade - so this machine is up for sale.
May just need a more aggressive cleaning, but may be the head.
Other than the above issue - this machine has been 100% perfect!
$2400 - OBO
South Bend, IN area (approx 1½ hours from Chicago).
info@pwcgraphics.com
574-298-8344