• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

New banding problem

Subysti

New Member
Not sure why but certain colors have developed a banding issue. I did the nozzle check plot and replaced 2 heads although they weren't really bad. Aligned heads and tests plots seem fine. Cleaned mulriple times. This may have started after replacing the cyan cartridge last week. Could it be a bad cart? HP 360 printer.
 

Attachments

  • 20230206_195353.jpg
    20230206_195353.jpg
    1.2 MB · Views: 223
  • 20230206_195408.jpg
    20230206_195408.jpg
    972.2 KB · Views: 137
  • 20230206_195458.jpg
    20230206_195458.jpg
    601.6 KB · Views: 150
  • 20230206_195505.jpg
    20230206_195505.jpg
    694.2 KB · Views: 145

Subysti

New Member
Take a look at your head 4. Now compare it to 3. Both should look the same.

4 is completely missing cyan...
Yikes, It was so clean i didn't even notice it. If maybe there was a little cyan showing it would have seen it! I replaced this am and its 90% there. Still some slight banding after head cleanings and alignments. Just odd how brand new printheads still show some bad nozzles in the service screen. Thanks
 
Top