kcorcoran
Premium Subscriber
Parting out HP Latex 360.
Was taken out of service due to a shorted power supply.
Machine is dirty but will clean the parts best I can as I pull them.
I have no info on the life of this printer as I bought it for parts for my 310.
Parts are obviously untested but Ive used the scan axis motor and some other parts on my 310.
Good for backup parts to have on hand or if you're in a pinch.
Prices will be at least half of cost of same used part on ebay.
Everything ships from 85138. Phoenix, AZ, USA. Via discounted shipping with PirateShip.com unless you want to send me a UPS or FedEx label.
I haven't disassembled and inventoried but here is what ISN'T available
- side, front, back covers and window
- maintenance door and door switch
- one of the pips
- take up reel and load table assembly
- right roll housing with gear
- carriage belt
- scan axis motor
- one of the rear fans
- edge holders
- one of the spindle hubs (black on I believe)
Let me know what you need and I'll see if I have it and we'll work out a very reasonable price.
Was taken out of service due to a shorted power supply.
Machine is dirty but will clean the parts best I can as I pull them.
I have no info on the life of this printer as I bought it for parts for my 310.
Parts are obviously untested but Ive used the scan axis motor and some other parts on my 310.
Good for backup parts to have on hand or if you're in a pinch.
Prices will be at least half of cost of same used part on ebay.
Everything ships from 85138. Phoenix, AZ, USA. Via discounted shipping with PirateShip.com unless you want to send me a UPS or FedEx label.
I haven't disassembled and inventoried but here is what ISN'T available
- side, front, back covers and window
- maintenance door and door switch
- one of the pips
- take up reel and load table assembly
- right roll housing with gear
- carriage belt
- scan axis motor
- one of the rear fans
- edge holders
- one of the spindle hubs (black on I believe)
Let me know what you need and I'll see if I have it and we'll work out a very reasonable price.
Last edited: