visual800
Active Member
Quick explantaion. local awning compnay needed a plotter, they use it about once every 2 weeks. So they called me and I said get a damn Bobcat. Small cheap and will do what you want. that was 5-6 years ago. the plotter now seems to do something strange/
after loading vinyl and you cycle the handle down it goes to the furthest roller on the right when it should be the left, if you tell it to plot anyway it cuts strange evil scratches on vinyl.
facts:
yes roller is in down position
power is on (I always liked that one)
computer is NOT connected to internet
nothing has changed
I do realize the plotter is cheap but I dont understand this behavior
could it need new drivers, firmware a large trash can?!
after loading vinyl and you cycle the handle down it goes to the furthest roller on the right when it should be the left, if you tell it to plot anyway it cuts strange evil scratches on vinyl.
facts:
yes roller is in down position
power is on (I always liked that one)
computer is NOT connected to internet
nothing has changed
I do realize the plotter is cheap but I dont understand this behavior
could it need new drivers, firmware a large trash can?!