Print-Cut Graphics on a Rock and Roll Crate?

[MachServTech]

This is an extremely low-energy surface with an exaggerated orange peel texture. Had anyone found a great vinyl for this application?
Thanks!

 

[SignMeUpGraphics]

Something like Alumigraphics should work, but the cutting will have to be by hand as it it metal backed.

 

[jfiscus]

We use Arlon DPF8000 for LSE Plastics. It does shrink a little, but it sticks down.

 

[Terrance the Deuce]

If you don't want to take out a second mortgage to get the alumigraphics, you could try 3M IJ39, Avery 2126, or Arlon 8000. All of these are hi tack options that usually stick well to LSEs.

 

[MachServTech]

Thanks everyone for the great info. I appreciate it.

 

[Inks]

We use Arlon DPF8000 for LSE Plastics. It does shrink a little, but it sticks down.

That one will work or the DPF8200 which will not shrink but is still high tack. Orajet 3105HT may also be an option