Print media issues

[Dvrk_Pvssenger]

Hi all, hope all of you are doing well. Have a look at these photos, let me know what you think could be the problem here in this print. These spots appeared for the first time recently in a good few years of printing on the same print media from the same supplier and in the same area, no change to the surroundings etc.

 

[MrDav3C]

Could this simply be dust or debris on the print media? If the whole roll is like this you should speak to your supplier and send them the photos.

 

[dannyd1962]

Double check your artwork and rip file

 

[TEN]

Hi all, hope all of you are doing well. Have a look at these photos, let me know what you think could be the problem here in this print. These spots appeared for the first time recently in a good few years of printing on the same print media from the same supplier and in the same area, no change to the surroundings etc.

You have not given any information. What printer, what type of material is this?

 

[White Haus]

Could this simply be dust or debris on the print media? If the whole roll is like this you should speak to your supplier and send them the photos.

That's exactly what is causing those specs.

Not to mention the feed calibration is off or incorrect profile being used, but that's another issue.

 

[MrDav3C]

That's exactly what is causing those specs.

Not to mention the feed calibration is off or incorrect profile being used, but that's another issue.

I did also notice the banding and presumed horizontal, but this wasn't the question!