printed folding camp chairs

[DizzyMarkus]

I looked in the directory and yet was unsure--- I need to have a price on getting the backs of 4 - 6 camp chairs-- the folding ones that go in a bag, done with some text and a photo. I wondered about one merchant that prints on pop ups etc but could not remember their name. Any suggestions? Is there a heat transfer that I can print here and transferr to that type material?

thanks for any advise -- christmas presents :0)


Markus

 

[Cyw]

Markus, if the chairs are nylon, use something like Solutions opaque. Use low heat vinyl for leather if they're made of something fragile.
Almost anything else will be fine if the backs are 600 denier poly.

Always test first.

oh and make sure you can get them under your press. I often have to build up a jig to raise the printing surface and keep everything else out of the way.

 

[DizzyMarkus]

thank you for the response-- double thankyou for getting it under my press :0) --- I have some 2" foam that I think will work great. I was mostly worried about adhesion and 2nd leaving a "heat press" mark in the back.

Thank you,
Markus

 

[DizzyMarkus]

Just a follow up to the original question. I spoke with Mike from Imprintables about this and was told any of their products will be fine for this. Hard to think "everything" will work. So I will try on my own first but thats the info that was passed to me.

Thank you,
Markus