• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Printing Double Sided on the JV5

particleman

New Member
We are really fighting our JV5 trying to print double sided. This was never an issue on the JV3. When you goto print the 2nd side the printer will not start in the same spot every time. This makes it impossible to align the 2nd side. Is there a setting to force the printer to start at the same spot every time???
 

Case

New Member
When doing a double-sided banner on the Mimaki JV5, go in to Setup, Feed Method and set it to "Normal" to turn off the Media Encoder. That will keep it from moving and not starting at the spot you want it to...


Case

 

ast

New Member
When doing a double-sided banner on the Mimaki JV5, go in to Setup, Feed Method and set it to "Normal" to turn off the Media Encoder. That will keep it from moving and not starting at the spot you want it to...
Case
Hi just want to ask if we can also do double side print with jv33?
 
Top