Ran out of ink...

[JamesLam]

So I sent a print job that was repeated 22 times and I knew I might run out of ink. Of course the machine did it's job and stopped appropriately. But where in the queue did it stop?

Can I determine through the software how much of the job was completed or do I have to physically count the repeats and start fresh?

 

[ddarlak]

Look at the job report and do some math, it will tell you how much was printed.

 

[JamesLam]

Look at the job report and do some math, it will tell you how much was printed.

I love riding on the signs101 coattails. I learn so much.

 

[JBurton]

I've done the same thing, 14 partial wraps, 8' long sides paired + 2' rear. I just stood at the laminator and scribbled hash marks as each one went through... I got 13 and a half. Only reason I didn't trust the math was that the printer said 'low' material remaining.

 

[Proofread People]

Nope, it will not at least I have never found that it does in the Onyx "View Printed Job Log", it will list that it was sent to the printer, date, time, material, dimensions and the quantity you entered.