Rasterlink 7 (jig print) JFX600-2531

[LP_UV]

This software absolutely chokes on a jig print arrangement of more than a couple files. What the heck is going on? We print things like coasters where we have orders for multiple images, in quantities of sets of 12 (12, 24, 36, 96, etc.). We use Rasterlink 6+ on our JFX200 with minimal issues, able to make an arrangement of multiple files 10-50. each with varying quantities to make a rip of 1-10 beds/pages of 170 units. This seems impossible on raster7. It hangs after each quantity is entered and you click on the next file, as if it is polling or pre-ripping in the background. Has anyone experienced this issue?

 

[Smoke_Jaguar]

Make sure you're using the latest build. Never seen a jfx600 that was in a running state in person, but some older versions of RasterLink had that issue.

 

[LP_UV]

Newest driver and rasterlink 7 installer used a couple days ago..

 

[LP_UV]

I've seen some slow down, lag on 6+ but nothing like this

 

[Smoke_Jaguar]

RasterLink doesn't typically need much of a computer to do decently as well. One of our JFX200s is running on an old Surface tablet and it works fine.

 

[LP_UV]

It only lags, becomes unresponsive in the jig print function with multiple files. Rasterlink 6+ did this a little bit on 30+ files but rasterlink 7 is basically unusable with more than a handful of files arranged in a jig.