SublettSigns
New Member
Hey guys,
I'm trying to get our Roland Camm-1 CM-400 Vinyl Plotter to work with our Windows 10 machine. When I plug in the serial cable to the PC I get this error
Er15:Framing/
Parity Error
I've been looking on this page for Firmware/Drivers that will work with Windows 10, but I can't find any..
http://support.rolanddga.com/_layouts/rolanddga/productdetail.aspx?pm=CM-400
Does anyone possibly have a solution for this problem? Should I use an older driver and/or a different COM port? Thanks in advance!
I'm trying to get our Roland Camm-1 CM-400 Vinyl Plotter to work with our Windows 10 machine. When I plug in the serial cable to the PC I get this error
Er15:Framing/
Parity Error
I've been looking on this page for Firmware/Drivers that will work with Windows 10, but I can't find any..
http://support.rolanddga.com/_layouts/rolanddga/productdetail.aspx?pm=CM-400
Does anyone possibly have a solution for this problem? Should I use an older driver and/or a different COM port? Thanks in advance!