Roland Pro 3 XC 540 Black and yellow not printing correctly

[Anointed]

Hello everyone,

I'm having print issues with my Roland Pro 3 XC 540. The black and yellow are not printing correctly. I've tried all the cleaning methods but didn't fix it. I did the test print and it proved likewise. Please any suggestions on how to fix this issue would be greatly appreciated.

Thank you
J

 

[Terry01]

Remove the Lc and Lm heads and swap them in the black and yellow positions. Do a realignment and use a cmyk icc profile when printing. Doing this will get you up and running and then look at replacing those two heads later. Alternatively replace the two heads now

 

[Anointed]

Thank you for the quick response. I have a Tech guy giving me a quote to fix it and if it's reasonable I will let him do the job but if not then I will do as you have suggested. Thanks again!