extreme-graphics
jason
Hope somebody can help having a few problems with an SP 300 that's been stood for some time. Thank you, soup thank you.
The yellow and magenta PrintHead print okay however the black and cyan nothing is printing.
I have removed the printHeads and swapped them over however I'm getting an odd print. We have changed the ribbon cables. We have checked the fuses on the main board both are okay and we have also replaced the print carriage board just because it was cheap enough to try. We have also had the transistors checked and they're all oka, still have the same problem. Any suggestions?
The yellow and magenta PrintHead print okay however the black and cyan nothing is printing.
I have removed the printHeads and swapped them over however I'm getting an odd print. We have changed the ribbon cables. We have checked the fuses on the main board both are okay and we have also replaced the print carriage board just because it was cheap enough to try. We have also had the transistors checked and they're all oka, still have the same problem. Any suggestions?