Roland Versacamm SP-300 small letters are blurry PLEASE HELP

[CENTERVILLE SIGNS]

I am printing labels for jars. The big type is good, but the smaller type is too blurry to read ? ? ?
THANKS IN ADVANCE & HAVE A GREAT WEEKEND ! ! !

 

[FrankW]

How look the nozzle test? Bidirectional printing adjusted? Try to slow down scan speed.

 

[Zoogee World]

As mentioned above, how is the nozzle test print? Also, do you have photos, which might also shed light on possible problems.

 

[Newei]

HEAD ALIGNMENT(Make sure the print head is parallel to the sacn), BIDIRECTION ADJUSTMENT, ADJUST BI-DIR, FEED CALIBRATION,

Please refer to my solution.

Need Help - Roland VS-300i print effect (Print Line Offset)

Hi, My VS300i did not find that the printing effect was not good and was affected when printing large pictures at ordinary times, but problems were found when printing fine lines. The print head was calibrated and aligned, but the lines printed in Scan direction would be offset, and the feed...

www.signs101.com

 

[MrDav3C]

As others have said, slow down the print head speed. Maybe also try switching to uni directional

 

[LiqueColor]

First thing you need to do is clean the encoder strip with alcohol. Then do a printhead alignment. Then go to uni directional. Are you using OEM ink?

 

[CENTERVILLE SIGNS]

ALL GOOD ... THANKS EVERYONE ! ! !