Hello all,
We have a ROLAND VersaCAMM VP-300i that has an error 0004.
It states the Servo Board should be replaced.
The board has an led that does not light when powered on, we have checked the fuses.
Issue looks similar to this:
www.signs101.com
What does "drop the cap station" mean?
Any insights? Is it worth getting new PCB or PCB repair?
Anyone know what fails on the boards? Perhaps it is just a bad/old capacitor in the powersupply?
I tried to have a look in the service manual - but hard to trace the power reference in online version (https :// www. scribd .com/ doc/ 290022670/ Sevice-Maunual-Roland-VP-540-VP-300)
Had a look a roland and it states the error is motor related:
www.rolanddga.com
Weird that the device states its servo board?
Kind regards,
We have a ROLAND VersaCAMM VP-300i that has an error 0004.
It states the Servo Board should be replaced.
The board has an led that does not light when powered on, we have checked the fuses.
Issue looks similar to this:
Need Help - Roland xc540 error 0004
After shutting down for a day, to get a cartridge, my xc540 throws this 0004 code. My local tech, said to shut off main power, drop the cap station, move the print head to the middle of the platen, and turn on. This worked only once, unplugged for a storm, same code. It's called a Sub CPU SRAM...
www.signs101.com
Any insights? Is it worth getting new PCB or PCB repair?
Anyone know what fails on the boards? Perhaps it is just a bad/old capacitor in the powersupply?
I tried to have a look in the service manual - but hard to trace the power reference in online version (https :// www. scribd .com/ doc/ 290022670/ Sevice-Maunual-Roland-VP-540-VP-300)
Had a look a roland and it states the error is motor related:
Article | Roland
www.rolanddga.com
Kind regards,
Last edited: