Rough or concrete print media by the yard

[Rat_Fink]

I have a customer that wants 2 truck decals printed on something that will adhere to Rhino Lining / truck bed liner. It is a very rough surface and I already tried regular high tack vinyl with no luck.
Are there any suppliers that sell media by the yard that might stick to bed liner texture? Besides this - I have never received requests for this stuff and do not want to purchase an entire roll.
Thank you very much for any info!

 

[Smoke_Jaguar]

I have had really good luck with General Formulations GF 885AE RoughMark material for stuff like that. Not sure your preferred vendor, but I get it from Plastic Guy out of Kansas. Might try asking for a sample to see if it meets your needs.

2.0mil Concrete Brick Contourable Gloss White Cast Vinyl Gray Air-Egress Gray

This film is a 2.0 mil high gloss white cast film coated with a solvent acrylic high-tack removable (HTR) pressure-sensitive adhesive on a 90# air-egress liner. The thick HTR adhesive is designed to aggressively grip onto textured substrates such as brick, block, or cement, yet cleanly remove...

plasticguy1.com

Data sheet is here:

https://www.generalformulations.com/wp-content/uploads/GF-885AE.pdf