• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

signlab e6

B

blazedhost

New Member
the software wont recognize my cutter,and or its not listed
is there anyway to add the cutter to signlab e6 setup.
thx
 
P

Pro Signs & Graphix

New Member
You have to call Cadlink to see what is the name of the proper driver. Not being in front of the machine and seeing the choices will make it difficult for anybody else - unless they have a Lynx - and most that do, won't have SignLab.
 
L

Liquid GraphX

New Member
It depends what version of OS (operating system) your running. XP pro w/SP2 will find your cutter as a printer when you plug it into the USB port....make sure you plug it into 1 or 2....SP supports USB2 which has faster data transfer. So if you have XP w/SP2 when you plug in your cutter/printer a dialog box will pop up and ask you to install new hardware....next or yes then pick no install manually then pick I have disk...that is when you put in the driver disk you got with your lynx.

Signlab should see this if not then you can install the cutter/printer from signlab. They have no listing of Lynx in the supported drivers that comes bundled with 6.5 anyway so you will probably have to call Cadlink to find out where to download them.
 
Rod

Rod

New Member
Download latest device driver from CADlink web site

blazedhost said:
signlab e6
need help with signlab for use with lynx 24" cutter
any help would be appreciated
Click to expand...
  1. Go to CADlink web site http://www.cadlink.com/
  2. From the top menu, go Downloads >> Plotter Drivers
  3. Set Manufacturer = Lynx Controller
  4. Set Output Device = Lynx CNC Controller
  5. Set Version of SignLab
  6. Click Install button
Does that help?

Rod at CADlink
 
You must log in or register to reply here.
Top