Signlab v10 missing driver

[djp]

Hi

I recently purchased a Secabo T60II (Great machine) Signlab v10 does not show a driver for this, Fiery / Cadlink will not help me they just want me to buy v11 which I really do not need or want to do at the moment

I have downloaded the trial version of v11 which includes the driver I am after, my question is can any one tell me where in the Signlab V11 folders the .ini driver files stored and can I transfer this to V10

Thanks
David

 

[Attila Nagy]

Use C60 Driver. Sure it uses the same commands.

 

[djp]

Thanks Attila, tried that already did not work

 

[Attila Nagy]

Thanks Attila, tried that already did not work

Are you sure it is because of the driver, not the connection setup?

 

[djp]

Are you sure it is because of the driver, not the connection setup?

Yes positive, plotter works ok with DrawCut Pro using same connection

 

[jimdtg]

SL doesn't manage drivers as you think - .ini driver file so you can't not transfer text code as you wish to your SL 10.

 

[djp]

SL doesn't manage drivers as you think - .ini driver file so you can't not transfer text code as you wish to your SL 10.

Ok thanks for letting me know, I will just have to stick with designing in SignLab and export to DrawCut to cut

I want to stick with SL as I have been using it for 20+ years but I am not going to give them a penny more the way they treat old customers as soon as they bring out a new version which is hardly different

 

[guillermo]

if you tell me what driver is, I may be able to help you, I have SignLab v10.

 

[djp]

if you tell me what driver is, I may be able to help you, I have SignLab v10.

Its not included with v10 only v11 - Thanks

 

[Aaronfarren]

Hi Guys
New to this forum stuff.
I was on holidays. Went back to use Signlab today.
All my images are gone. Crosses, crests everything. How do I get them back onto Signlab

 

[jimdtg]

Hi Guys
New to this forum stuff.
I was on holidays. Went back to use Signlab today.
All my images are gone. Crosses, crests everything. How do I get them back onto Signlab

Which images are they? If those are Signlab's Cliparts and Fonts so you can get they back from installation archive.

 

[Aaronfarren]

Yes they are all those ones. But when I go to import anything I’m not able to any help would be great.

 

[jimdtg]

Yes they are all those ones. But when I go to import anything I’m not able to any help would be great.

Do you mean Signlab didn't import file? Try to uninstall Signlab, clean its folder completely and install software again and make sure you still have license files to do it.

 

[Aaronfarren]

By doing this will I lose all my saved work? It happen a few years ago where I lost a lot of layouts and designs.

 

[Attila Nagy]

Do you mean Signlab didn't import file? Try to uninstall Signlab, clean its folder completely and install software again and make sure you still have license files to do it.

Do not overthink it. Just need to understand files and folders system, and choose the correct Files of type filter or Chose All Files (*.*) in the Import Window.

 

[SignTDF]

Hi

I recently purchased a Secabo T60II (Great machine) Signlab v10 does not show a driver for this, Fiery / Cadlink will not help me they just want me to buy v11 which I really do not need or want to do at the moment

I have downloaded the trial version of v11 which includes the driver I am after, my question is can any one tell me where in the Signlab V11 folders the .ini driver files stored and can I transfer this to V10

Thanks
David

The "Secabo T60II" driver is only included in SignLab 11 and not in SignLab 10.
This problem is easily solved.
- Download and install the demo version of SignLab 11. After installation, you do not need to register or start the program.
- Go to "C:\CADlink\SignLab 11.0" and locate the files below, then copy and paste them into a folder on your PC's desktop.

You now have the SignLab 11 driver setup package. Start installation and check if you have everything.

- Uninstall SignLab 11 and install SignLab 10. Copy and paste the files into "C:\CADlink\SignLab 10.0."
- Start the installation to install the desired driver.

Good luck,

 

[Aaronfarren]

Do not overthink it. Just need to understand files and folders system, and choose the correct Files of type filter or Chose All Files (*.*) in the Import Window.

Yes that work. Thanks so much for the help