• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

SP 300 High Quality Issue

mrgraphixx

New Member
I am printing directly from Coreldraw to an SP 300 and I have done it for years. Last time I changed the linear encoder I began noticing blurry prints on high quality, but high speed prints are fine. I just changed the encoder strip again and this time i went into the encoder calibration through the service menu and I still have the same results, blurry at high quality, perfect at high speed.

Any one have these issues ? Not sure what I am missing here.
 

CS-SignSupply

New Member
What does the nozzle test look like? Have you adjusted the horizontal and bi-di settings in service mode?

Could still be static or failing head possibly. One color or all?
 

mrgraphixx

New Member
No, have not adjusted heads.

It does it on all colors, but I have also noticed this: If I print directly from Coreldraw to the SP 300, the blurry condition occurs. If I send it to the Signlab Visual Production interface, it prints fine at high quality. I am starting to wonder if it is a printer driver problem?
 
Top