Sp540v ink leak

[enzo972]

Hello everyone,

I have an SP540V printer, and when it prints trim marks, there are always magenta ink smears next to them. When I print withoutDo you have any ideas? Thank you for your help.

 

[damonCA21]

First step is change your dampers. Only get OEM Roland ones, not the cheap chinese copies. Give the head a good clean on the surface and see if anything else leaks out. Also make sure your captop is draining properly and not holding ink in it

 

[enzo972]

Thank you so much for your help. I changed the capstops not long ago, and when I checked them, I saw that the one for the magenta/yellow one was indeed holding ink. I pushed it out with a syringe, and everything is fine now. Thanks a lot!

 

[damonCA21]

Glad you are back working properly.