FunkotronXL
New Member
Avery discontinued their static cling media around 6 months ago or so, very disappointed as that stuff was great.
Does anybody know a good aftermarket option for static cling in both clear and white that works well with Gerber Edge systems?
The Gerber brand stuff sucks; shreds sprockets, does not print well. Tried application tape or scotch tape on the squeegees and used a variety of heat settings to try to resolve print issues, including: Lexedge, Scotchcal 220 HP, Static Cling.
Roll was a lot # from March of 2017 so it isn't terribly old. Workshop temperature is 70 degrees with 55% humidity. Omega v. 2.6.
Should I keep this stuff in a refrigerator?
Does anybody know a good aftermarket option for static cling in both clear and white that works well with Gerber Edge systems?
The Gerber brand stuff sucks; shreds sprockets, does not print well. Tried application tape or scotch tape on the squeegees and used a variety of heat settings to try to resolve print issues, including: Lexedge, Scotchcal 220 HP, Static Cling.
Roll was a lot # from March of 2017 so it isn't terribly old. Workshop temperature is 70 degrees with 55% humidity. Omega v. 2.6.
Should I keep this stuff in a refrigerator?
