It's possible do upgrade, but it would be very expensive(over 4k in parts alone) and access to some of the parts like the flat cable and shielding could be difficult to source. It would also be very difficult to install all the parts yourself, and tech installation is recommended. You would likely end up spending almost as much to upgrade the cutter as you spent on the S2T75 originally, so you might be better off putting those funds towards a new S3TC75 that already has the camera installed. MSRP for the S3TC75 is $8,750, but you send me an email to
philj@airmark.com I can work with you on a discount towards one of those.
Best regards,
Phil Johnson
Airmark Corporation
(800)527-7778, ext. 112
philj@airmark.com