• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Technical question about printing on Cooley flex material

G

gunshy

New Member
We print alot of flex faces and we have noticed the side we usually print reversed/mirrored (the rougher side) ends up being a much better print than the smooth side, the smooth side is what we have been useing for the 1st surface print and then laminate. Could we have the rougher side as the 1st surface and liquid laminate that side?
 
E

EthanW

New Member
gunshy said:
We print alot of flex faces and we have noticed the side we usually print reversed/mirrored (the rougher side) ends up being a much better print than the smooth side, the smooth side is what we have been useing for the 1st surface print and then laminate. Could we have the rougher side as the 1st surface and liquid laminate that side?
Click to expand...

flex banner?what machine?Latex may request a rougher surface,but UV request a smooth surface.
 
You must log in or register to reply here.
Top