Test Prints different color

[Joesignshop]

Can anyone tell me why the test print for magenta is printing Cyan and magenta looking black? After a powerful clean and printing magenta bars in Versaworks it comes back to magenta. And yes I know I have other dropout issues and lt cyan printhead needs replacing. I have a Roland VG640

 

[ElfringbE]

Hello,
Looks like a mix of cyan & magenta.
Attached is test file that might help, good luck

 

[damonCA21]

First thing to try is changing the captop. Also check the hose from the captop to the pump is completely clear. When the captop doesn't drain properly ink can sit in it and soak back into the head. A couple of cleans will clear this out, but it will come back when the printer is left overnight

 

[Joesignshop]

First thing to try is changing the captop. Also check the hose from the captop to the pump is completely clear. When the captop doesn't drain properly ink can sit in it and soak back into the head. A couple of cleans will clear this out, but it will come back when the printer is left overnight

Thanks, cleared the hose and is holding!