versa works roland sp540

[graphix]

should a 4'x17' banner with just text two lines take 1+ hr to rip and 2+ hr to print?
thanks

 

[zmatalucci]

what file type are you sending, and it depends on the power of your computer.

 

[Mark Roberts]

Wow...that's a long time. I think there is a problem somewhere. How much RAM are you running? What about available disk space?

 

[B Snyder]

should a 4'x17' banner with just text two lines take 1+ hr to rip and 2+ hr to print?
thanks

Not if you want to make any money.

 

[Pacific Coast Sign]

Depends on your dpi you designed at and what quality setting. For a 4x8 sign the SP 540 takes about 1 hour at standard quality. You may check the time with your Versaworks as to how long it will take to print. The XC540 would take 30 minutes for your job to print.

 

[graphix]

what file type are you sending, and it depends on the power of your computer.

2.8 gig processor 2 gig ram 18 gig free space exportas eps from corel then it does some tiff thing but when i load in versa it is eps...

 

[baasman73]

Just export it as 150 dpi Tiff or JPG (little or no compression)
and run it on generic banner high speed mode with pass

just done 60feet in under 3 hr