• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Need Help Versacamm VP540i Black and Cyan Problems

M

Manning

Premium Subscriber
Hello everyone... A few weeks ago I noticed that my black printing with a red tint (pic A&B). After printing as much as possible using RVW BK-21A, I changed out the caps, dampers, & pumps. after which I printed a "S" (Pic C) as a test. This did not fix the problem. Then I printed another test S (pic D) and you can seen the black and cyan are not printing properly. Pic E you can see the black has stopped completely and cyan is barely hanging on. Any suggestions?
 

Attachments

  • Print A.jpg
    Print A.jpg
    922.3 KB · Views: 340
  • Print B.jpg
    Print B.jpg
    619.3 KB · Views: 324
  • Print C.jpg
    Print C.jpg
    670.8 KB · Views: 322
  • Print D.jpg
    Print D.jpg
    603.6 KB · Views: 310
  • Print E.jpg
    Print E.jpg
    561.8 KB · Views: 317
P

player

New Member
Fuses and cracked damper carburetors are the 2 common things to check with dx4 printheads.
 
  • Agree
Reactions: 1 user
M

Manning

Premium Subscriber
player said:
Fuses and cracked damper carburetors are the 2 common things to check with dx4 printheads.
Click to expand...
After all the new parts...a powerful clean...soaked the heads for 2 hours...another powerful cleaning... we're back printing again. Thanks,
 
  • Agree
Reactions: 1 users
You must log in or register to reply here.
Top