Vg640 cyan not printing properly

[StickerBee]

Hey guys,

Picked a used printer with heads all 4 replaced 3 months ago. Pinter is just 3 years old and lightly used. Though I traveled 1400 kms to haul it and was no off power for 24 hrs. Cleaned it manually same thing.

Whats going on?

Please help.

 

[Jay Grooms]

Looks like the cyan head is clogged, try doing a powerful cleaning, Makes me wonder what their cleaning schedule was, my flatbed that gets used daily has only had two heads replaced in 4 years.

 

[StickerBee]

Powerful cleaning still the same. Cyan still not printing.

 

[GTSTech_1]

Have you tried pulling ink from the captop tube? Also post what the nozzle check looks like via test print at the printer panel, not test print from Versaworks. Even with the low miles and time traveling, the ink would migrate away from the head, so not outside the norm to have to perform multiple cleanings. Wouldn't hurt to fill the captop with cleaning solution either.

Just my .02

 

[StickerBee]

This is what i got from the nozzle test in the printer.

 

[StickerBee]

Have you tried pulling ink from the captop tube? Also post what the nozzle check looks like via test print at the printer panel, not test print from Versaworks. Even with the low miles and time traveling, the ink would migrate away from the head, so not outside the norm to have to perform multiple cleanings. Wouldn't hurt to fill the captop with cleaning solution either.

Just my .02

Its confirmed! Captop tube. So much pressure in it. Its all good now. Was so worried that it might be the head but thanks god they are all in perfect shape. I can enjoy niw my vacation in Vegas.