VS-420 issue, 0101 service call

[Willy]

I tried to do a Limit Initialize and after I get to cutter down position, I get an error of Unrecoverable Limit Sensor. Did a check on what sensor it was and it said (L) so I located sensor and replaced it and still getting same error. Can someone please help? Thank you in advance.

 

[meritan]

0101 , its a Limit initialisation error

 

[Willy]

0101 , its a Limit initialisation error

This I understand, but how do I get pass the Unrecoverable Sensor error. I replaced the sensor and still when I try to do a Limit Initialization, I get the same error.

 

[Willy]

I tried to do a Limit Initialize and after I get to cutter down position, I get an error of Unrecoverable Limit Sensor. Did a check on what sensor it was and it said (L) so I located sensor and replaced it and still getting same error. Can someone please help? Thank you in advance.

After doing a lot of searching, I found a YouTube video and in the discription it said to make sure head is parked over Captop or you'll get the unrecoverable limit sensor error. Problem solved. Now I restart VS 420 and I get a Scan Motor 0040 Error. Now what? Really feeling frustrated.

 

[Willy]

WooHoo!
This problem is solved.​

After thinking long and hard and all the things I tried, My issue started when I accidentally got into Limit Position instead of Service Mode. I tried to a Limit Initialization one more time and this time it worked. All errors are gone.
I'm very happy that this problem is solved. Now to move onto the reason for changing the dampers. Printer has been setting for a long while, but I had the head soaking on the captop and periodically I would check it to make sure it didn't dry out. So I go to fire my VS-420 up and the print head is plugged up. so after two cleaning cartridges and a lot of cleanings, I decided to change the Dampers. Looks like the nozzle check is getting better.