Hi all. I had some work done on my VS 540 yesterday and the tech was playing around with heat settings and now things seem just a bit out of whack. What do you all have your machines print / dry heat settings at? I am currently trying 106 / 114 for printing on regular 3651 vinyl. I think it may be too low due to the lines not being very sharp, but I don't want to go too high. Any help is appreciated!
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
vs 540 heat
- Thread starter Cynosure
- Start date
DizzyMarkus
New Member
Not 540 but 300v.....104...114
Those temps are in line with other printers using the same material. I would confirm that the tech didn't leave the machine in "Service Mode"....hit the menu button, if you see "service menu" then it's in service mode. Simply turn off the sub-power (front power button) and turn the printer back on to get out of service mode. While in service mode the heaters and sensors are disabled.
My .02
GTSTech_1
My .02
GTSTech_1