Samurai_Screwdriver
New Member
Hey all,
We're currently rebuilding an old JV3-160S and need a brain for it. What we're looking for is a Main PCB for a JV3-S model (Not SP). i.e. for a machine with three print heads, not four.
The correct board would have slots for 6 large ribbon cables (not 8 like on the SP) and will most likely have the part number E102570B on it.
We would prefer a board in working condition but can also repair a board that was non-firing/continuously firing on one or more channels.
Let me know what you have. Cheers.
We're currently rebuilding an old JV3-160S and need a brain for it. What we're looking for is a Main PCB for a JV3-S model (Not SP). i.e. for a machine with three print heads, not four.
The correct board would have slots for 6 large ribbon cables (not 8 like on the SP) and will most likely have the part number E102570B on it.
We would prefer a board in working condition but can also repair a board that was non-firing/continuously firing on one or more channels.
Let me know what you have. Cheers.