Wear Strip Replacement

[redline graphics]

My wear strip on our Roland camm 1 cx-24 just got chewed up!!! Rookies!! A new one is a few days away. Is it possible to use something else? I heard to use a strip of reflective??? Good ibea? Bad idea??

Im desperates!!! I needs to cut decals today!!!

 

[redline graphics]

Thanks Pat...

 

[J Hill Designs]

maybe sandblast mask...

 

[J Hill Designs]

ooh ooh 2mil sintra?

 

[Techman]

find a sheet of 1/16 hdpe" and make your own. one sheet will make about 100 strips and will cost you about the same as one strip.

wanna try it?

http://www.grainger.com/Grainger/items/1ZAZ8?cm_mmc=Google Base-_-Raw Materials-_-Plastics-_-1ZAZ8

 

[Robert M]

cut protection

I have seen people use a few layers of masking tape over the old strip. You will have to adjust your down force. If the strip is on one piece you can flip it over, but you have to deal with getting all the glue off