Window Perf

[joshatvideoplus]

I have a Mimaki UJV-160 and am having difficulty with window perf.

I am new to this so I am probably just not doing something right.

The problem is that the ink is curing between the holes on the perf and I have tried several tings to no avail. Any advice will be greatly appreciated.

 

[bayshorecreations]

Run it with the heat turned off

 

[joshatvideoplus]

It is a UV printer I am not sure how I can turn the lamps off, also the ink doesn't cure without UV light.

 

[MikeD]

when you pull the perf off of the liner, does the ink still clog the holes, or does it stay on the liner? You may have luck switching to a different liner that retards UV ink...no idea what type of liner that would be though.
Good Luck!

 

[joshatvideoplus]

Mike it does stay clogged in the hole, I am using a different brand then I tested on the machine, the other brand worked it had a clear plastic like liner, what I have now is some kind of coated paper.

 

[MikeD]

that makes sense.
Hopefully you can transition back to the material you tested without hurting your profit.