-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Wish me luck
- Thread starter 32bantum
- Start date
luggnut
New Member
when i did it the first time .... it took so long the ink lines lost all the ink took me forever to figure it out and get all the nozzles firing... but the second time was real smooth and all work perfectly afterwards
i also changed all the dampers both times ... i changed them one at a time now because i think thats where i lost the ink vaccum.
i also changed all the dampers both times ... i changed them one at a time now because i think thats where i lost the ink vaccum.
32bantum
New Member
Piece of cake!!! took about 20 minuets including cleaning up old ink. I had a noise I had posted about in another post. Turns out the guide in the pump that keeps the main drive gear in place had broken. I had an old pump from the last owner and it looks like it had done the same thing on that one. First nozzle check after one cleaning was 100%.