• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Wrapping a Coin Machine

SIGNMAN_52

New Member
A client has a new coin machine and would like the sides and part of the front wrapped. The sides are metal, but textured, The front is plastic with a light texture. The manufacturer has their demo unit wrapped, so it seems to be do-able. Any advice on what may work for this? I will attach some pictures.

Thanx
 

Attachments

  • 2012-05-24_10-33-30_565.jpg
    2012-05-24_10-33-30_565.jpg
    34.1 KB · Views: 100
  • Coin Mach.jpg
    Coin Mach.jpg
    40.4 KB · Views: 74

Stuckup

New Member
I Install Avery 1005, Arlon, or 3M 180 on minimum 5 a week. Whatever they send me is installed. All work, as long as cleaned correctly and heated when the Temperature is low. Just use a cast and put heat into it.
 
Top