XR-640 empty white cartridge

[Real Deal]

Hi all,im so regret that i installed a white channel to my Roland XR-640 cause i don't even use it quite often after i bought the machine.

Right now I'm in the middle of printing job but suddenly the machine stopped because of the white ink is empty, i just can't remember how i can keep running the machine but without to buying a new white ink cartridge?

Thanks

 

[Ragnabrok]

put tape over the flag, it pops out of empty cartridges on the bottom right side, near the front. Alternatively, buy a max2 cleaning cartridge, and put that in place of the white, if you aren't using white no sense dropping that much cash into the waste bottle.

 

[Real Deal]

put tape over the flag, it pops out of empty cartridges on the bottom right side, near the front. Alternatively, buy a max2 cleaning cartridge, and put that in place of the white, if you aren't using white no sense dropping that much cash into the waste bottle.

Hi thx for reply, when you say the flag is that a slot on the bottom right side, if so i just did but the machine still dons work, maybe i tape it wrong area?

 

[Ragnabrok]

possibly, but you really have to tape it back into the cartridge. the flag can bulge the tape out enough to trigger empty.