Need Help Z6200 - roller is wider than the media by 1 inch

[Tony Mah]

Hello,

I work for a charity and we print in-house posters. I just bought a roll of 20mil aqueous printable magnetic material. The roller is 1 inch wider than the media. According to the manual the media needs to be flush with the endcaps, but with this material there will be a 1 inch gap on the right side.

I haven't tried to load the material. Wondering if it will work?

I checked with both Master and Magnum magnets and they tell me this is how magnetic vinyl is normally shipped. Can anyone provide insight?

Thanks,

 

[BigfishDM]

It will be easier to just print adhesive vinyl and apply it to the magnet if you cannot get it to work.