-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Latest activity
-
Texas_Signmaker replied to the thread Help cutting acrylic panels.Keep on your truck a battery powered jig saw with fine tooth blade. If you're installing these type of faces often it's very common you... -
-
damonCA21 reacted to guillermo's post in the thread White dots on the image (ROLAND RF-640) with
Agree.
and it happens only with red color, many times I had this problem, solution....... get another roll. If the roll is at least 90 new, you... -
damonCA21 replied to the thread Sticker printing.Problem there is the customer can just go direct to those places and cut out the middleman....
-
I would venture to say, those faces are high impact acrylic. Anyway, if ya wanna play it safe and you only have 8 corners to snip...
-
damonCA21 replied to the thread Sticker printing.The problems with outsourcing are : No control over quality Increased turnaround time Increased cost All of these will put people off...
-
StarSign replied to the thread Sticker printing.Are we talking print, print/lam, look at the quantities, 1,100,10,000? There are plenty of places out there that in reality, unless you... -
My rep was "replaced" by someone who doesnt know the first thing about print media, even giving the new person the actual catalog code... -
Hello, I've been searching forums about this but need some more answers. I make vinyl decals but have been wanting to get into sticker... -
So my customer's challenge is "Because it snows a lot up there, they’ll need to be really durable — something that can hold up in wind... -
I would venture to say, those faces are high impact acrylic. Anyway, if ya wanna play it safe and you only have 8 corners to snip...
-
JR's reacted to Ron at Forest Litho's post in the thread Help cutting acrylic panels with
Informative.
If you use a saw make sure the blade has small teeth and is sharp. also spray it with water constantly. If it gets hot the plastic will... -
Gino replied to the thread Help cutting acrylic panels.I would venture to say, those faces are high impact acrylic. Anyway, if ya wanna play it safe and you only have 8 corners to snip...
-
DChorbowski replied to the thread Graphtec FC5100-75 parts help.I ordered one for a FC8600 off aliexpress a few weeks ago and it worked out great. Have you searched there for the size you need?
-
Zoogee World reacted to Glavin_ID's post in the thread Buyer Beware - Scammer Jim Church, Tritech USA with Agree.
Just wanted to bump this back up since I see Jim is out there working again after what seemed to be a little hiatus to lay low. Multiple... -
fr7706873 reacted to Hoeky1's post in the thread Oce Arizona 350GT Making Weird Fan Noise with Agree.
We cleaned the fan filter and the noise stopped for anyone who may see this thread in the future!
