• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

cut

  1. Flexi-Graphtec perf cut shiift

    1st time trying to make contour cut and perf cut for a decal, so bear with me. Flexi print and cut 12, Graphtec 8600. I have a simple circle for a test. Drew the green circle in Flexi, added 2 contour cuts: one just inside the edge of the green to cut just the vinyl, the second one is 1/8"...
  2. Contour cut and photoshop

    I am used to flexi as i could create a contour cut around a image out of Photoshop. We now have Onyx postershop 12 as of today and i am so lost. Can anyone explain how to create a contour cut on a Photoshop file or is there a way to do this inside one of the onyx programs. I have watched videos...
  3. onyx 12 Postershop and cut server

    I am loosing my mind i think but can someone please tell me how to cut a simple cut path file. No print no contour cut. Like i want to cut my name out of white vinyl saved as an illustrator file?
  4. cutting blade help

    Would anyone know where to get the cutting blades for a mutoh ultima SC-1400D? They have the small stop on the end that a lot of them do not have. We are needing the 60 degree blades for the thick material that we cut. I can always find them on Ebay but they are out of the US. I used to have a...
  5. T160 Problem

    We've had this cutter for a few months now and once set up has been great. Just lately we've had an issue where we set the pressure correctly then part way into the job it will increase the knife pressure so much it ruins the job. Like it would cut through the backing if we didn't have the...
  6. Cut or Perforate through poster paper or stonehenge paper?

    Hello, Is there a blade that can cut through papers and not vinyl? It seems on 45 degree and foil blades it does not penetrate on the back of the paper.
  7. Sublimation cut and sew looking for designers for sports uniforms

    hi there we are a cut and sew shop in Canada and we are looking for new artists to join to the team please email me at dd_fot@shaw.ca for details please send your portfolio thanks Don Dawson Owner West Coast Athletics Coming soon
  8. cutting Avery vinyl on vp-540

    HI, hope I can explain this. My Graphtec just died and I need to cut a black vinyl job using Avery vinyl, (designed/set up in signlab) so I sent it over to our Vp 540 and gave it a contour cut and it did a horrible job ( the sanserif's where half cut off) looking at the options in the control...
  9. CB15UB blade

    Hi guys, We have some jobs that require small text to be plotted and we have been using the CB09UA blade. This is fine but I noticed the smaller text the harder it is to cut cleanly - the joins are not complete and in some places it doesn't cut through the media all the way so we have to finish...
  10. digitize point and x axis errors

    Anyone had digitize point errors where it is just looking in the wrong place for the registration mark? We've cut dozens of pieces in this job correctly but on this one sheet the head just wont read the marks correctly for some reason. We have made several of the same file and it read and cut...
  11. steel + waterjet = who does it?

    Looking for a vendor that cuts steel, I have already contacted Big Blue Saw since they are listed as a MM here. Are there any others who cut steel? We have a customer who is looking to get some “budget” steel cut for an RV park they are opening The specs that we know Material: Steel...
  12. Corners aren't cutting nicely on Mimaki CG-130FX plotter?

    We're contour cutting digitally printed graphics and it seems the corners of letters aren't cutting or the cut is stopping just slightly too short. Any thoughts? Is there a setting to over cut slightly at the end of each letter make sure it completes the cut around the letter entirely? I just...
  13. issues cutting vinyl with flexisign and roland

    Didn't know where to post this as I don't know if this is a Flexi issue, Roland issue or Windows issue. I have had a Roland CX-500 for about 15 years, I cut a lot of small text vinyl, precisely .68" tall, tons and tons of it. Every so often over the last 10 years I run into this issue and...
  14. Question Is There a Clear Vinyl for Textile Use?

    I'm finding ImagePerfect IP6901 practically impossible to cut unless the design is large without small objects. Is there a clear textile vinyl available? If so, I could cut around the design rather than having to weed small objects. Cheers John
  15. Print job for someone with a Summa

    I used to have a Summa DC3 printer - we do not use it anymore. I made a bunch of window decals for a customer using the orange ribbon - and now they are wanting more! I can't achieve the bright orange color on my inkjet. I tried to have someone else print them for me, but they won't cut some...
  16. FlexiSignPro 8 and Windows 10 error

    I am running FlexisignPro8 and just upgraded to Windows 10. So far everything seems to work except for when I want to cut/plot. Every time I click on Cut\Plot I get a message that states an unknown error occurred and it shuts down the Flexi software. Does anyone know of a way to solve this...
  17. How to cut Acrylite successfully?

    What do you you guys to do cut Acrylite without it cracking? I haven't found the key yet. thanks! Bryce
  18. Cutting Business Cards on Roland?

    We'd like to print and cut our own business cards on our Roland Sp-540v. But we've heard that this is very taxing on the machine as you are cutting through card stock and also all the way through the material, risking messing up your blade strip. We don't mind going through blades, but we don't...
  19. replacing printers

    Hello, I'd appreciate any experienced thoughts about this. I currently have a Mimaki JV33-160 and a Mimaki CG-130fx II. The thing is that as of a year ago I've completely stopped anything that has to do with local market, and I make stuff to sell online. I sell on eBay and Etsy and my...
  20. Single Color Cut Vinyl

    Single Color Cut Vinyl

    A simple clean logo design using black cut vinyl
Top