• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

cut

  1. AutoTrace a logo outline help.

    I need some help. I have a tiff graphic that I need to cut after I laminate it. I cant figure out how to get my registration box around it. I only need the outline to cut but all I seem to be able to do is cut the entire logo. How do I cut only do an outline around the logo and not just every...
  2. Print & Cut with Graphtec FC7000MK2-100

    Hello! I just picked up a Graphtec FC7000MK2-100 to supplement the prints I shoot out of my Mimaki JV33. I've gotten my Graphtec to plot out items through CorelDraw x5 (with Cutting Master plugin) but I want to figure out how to Contour Cut!!! I've tried searching the forums on how to get...
  3. Mimaki CJV30-130 not cutting where it's supposed to...

    So I'm making hard hat decals. They're printing beautifully. The machine switches to cut mode, reads the crop marks, then proceeds to cut all the decals out one cm too high and 1 cm too far to the left. Hmmm... I've checked my pointer offset. It's fine. I'm using RasterLink Pro 5 SG, and up...
  4. Cutting Phototex

    Hi, I was hoping I get some inputs in cutting phototex. I have a roland VP540 print and cut machine, and even for the basic decal designs, I am facing lot of problem in cutting as there are loose fabrics which still do not get cut. I have done dual cutting also, but no luck. I am cutting with...
  5. Custom Size Boards

    We often need one board cut in a custom size out of a material that we can't easily cut at our shop - like 080 aluminum. Does anyone have a source for small quantity, custom size boards? Thanks for your help! - Marie
  6. Interior Graphics - Cut Vinyl on Wall with Custom Acrylic Signage

    Interior Graphics - Cut Vinyl on Wall with Custom Acrylic Signage

    Interior project we did for a Rehabilitation center. This is only part of the project. This is a 20'x4' quote on an interior wall. We used Orocal 651. We also did the custom acrylic directional sign.
  7. Vehicle wrap where to trim

    Hello, I want to ask everyone where they trim to on a vehicle. Do you trim up to edge of door or wrap the vinyl around the door edge.I f you cut in through the centre between door and pillar you are left with maybe 1/4 inch this the area I am talking about.The same with wheel arches where to...
  8. How to set Cut Contour in Corel Draw 5x?

    Hello, I know to set Cut Contour in Corel Draw 4x but can any body help me to set Cut Contour in Corel Draw 5x for Roland VersaCAMM VP-540. TO USE CUT AND PRINT FUNCTION. AFTER EXPORT THE FILE FROM COREL DRAW AS .eps. I'll be very thankful to you regards
  9. Cut contour transfer

    I designed some text and artwork on my laptop and created strokes to be my cutline and saved it to a pen drive. when I open it up on my desktop and turn the strokes into the versaworks cut line in Illustrator it does not give me a cut line when I import it to Versaworks. Has anyone had this...
  10. cut contours rather tears the vinyl!!

    Hi, I am facing issues with the cutting in my machine (VP 540i). The cutting performs dots (more like a tear than a cut) and especially in the corners it is more pronounced (big dots at sharp corners). I have replaced the blade and the blade holder. Both did not work. I am not finding the...
  11. Cut contour in illustrator CS3 and Versaworks

    Hey guys. I had this set-up on my CS2 for cut contours and now its jsut not working on my illustrator CS3 im under the impression that usualy it had to be a named color "CutContour" and the color dosent really matter i think... i usualy take pink since its easy to identify. Maybe someone can...
  12. strange behavior

    Has anyone ever sent a file to be contour cut by a your graphtec and instead of reading the registration marks it just cuts a several small digits and quits? I have a new fc8000 that I have been struggling with to do contour cuts. I print with Mutoh 1304 and RIP with Wasatch. After struggling...
  13. Wrong cuts wasting tons of money!!

    Alright, I'm so fed up with my printer right now.... So, We have this fairly large company ordering decals cause they are doing their whole fleet. They order roughly 6 sets per week and we just keep a running total and bill them every 5 weeks or so but recently we've changed the way we do...
  14. Contour Cut

    Hello: I'm working on an image in Illustrator CS2 and I am trying to use Contour Cut in order to print and cut in Versaworks. When I apply the contour cut, it does the whole image even within. I initially began with this image Photoshop then I vectorized it in Illustrator. But then I also...
  15. Rich Williams Nursery

    Rich Williams Nursery

    Rich Williams Nursery pickup - Transparent Edge print on metallic vinyl
  16. Rich Williams Nursery

    Rich Williams Nursery

    Rich Williams Nursery Pickup - Transparent Edge Print on metallic vinyl
  17. Palm Beach Aquatics 02

    Palm Beach Aquatics 02

    Edge print and cut vinyl. This is a 3 panel size 34.5" high from slogan to top of logo.
Top