• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

printer

  1. Head replacement for S70670

    Hey guys. I'm close to buying a S70670 for 1K. Both heads are damaged and I plan on replacing each, both service stations, along with the ink station component as I've seen everywhere they were slightly defective. I'm handy with printer maintenance/repair and feel capable. How much do these...
  2. Summa DC4 for sale first $3000 takes it!

    Summa DC4 for sale. We acquired it from another company sale and have no use for it. We were told it has very low usage. This is for the printer only. We were told there maybe some cartridges included but not %100 sure. There is no software but it can be ran from Flexi without issue. If you are...
  3. Onyx Postershop 12 with Graphtec Cutter and Epson Printer

    Ok so i am looking for general information. Someone who might be using the same cutter and onyx postershop at least. the printer side of it is not as important at this moment.. I have 2 other threads open but this would be a more direct question for someone using the same setup. Thanks
  4. Question considering 110 purchase

    Hello, I am considering purchasing a HP 110. I own a vinyl supply store for crafters selling adhesive and heat transfer vinyls. I want this printer in order to print custom patterned vinyl for my customers. I will be completely new to the vinyl printer world and wonder if this would be a...
  5. Looking for a beginner printer/cutter

    I currently have just a cutter and I am looking in to printer/cutters. This business is a side gig for me so looking for something economical and also realitively easy to maintain. with a printer cutter I will be producing t-shirt transfers, sign graphics and some small vehicle graphics which is...
  6. VS540i question

    Hey, Our shop has a versacamm that inserts about two inches of dead space between each job we send. Is there a setting on the printer to adjust this? Thanks for all the help! Kyle Stewart
  7. Need Help Versa Camm SP300V Help

    Hey All... Came into work today and turned on my printer. It showed all my inks were empty...and they were, my waste tank was full too...that was the 1st thing Replaced all the inks and the printer went through it's start up, did a cleaning. The width came up as 0 and then it says internal...
  8. Need mutoh software to change serial number.

    I need the software that allows you to change the software on a mutoh vj-1204. I want to be able to change the serial number to the vj-1304 to allow my printer to print the full 48" in bi drictional mode. I have a 1304 serial number but cant change the full serial number only the last part of...
  9. Suggestions laser proofing printer

    Hi, I would like to have a suggestion for a laser proofing printer. I would like to be able to print on 12inx18in and take up to 300gsm paper (I wish for a 350gsm). It will be use for hard copy proof and some internal flyers once in a while. Any suggestions?
  10. Oki (Seiko) w-64s print head question

    I've got an issue with my Y printhead (assuming its the damper in the head), I've tried soaking it for a couple hours in NMP fluid and my Y ink is still dropping out. It started with Air in the Y line, replaced multiple "o"rings and have finally got the line sealed up and still having issues...
  11. Problems with Oracal 3751RA

    I've three rolls, all returned, in the last two weeks that appear to be contaminated. The 3rd roll I received last night and attempted to print this morning. All from Fellers, different warehouses, different lot numbers. The ink develops a plethora of small fish-eyes everywhere. I've run off...
  12. Lightest color to print without white ink

    Hey, I've been asked to make a decal on a clear vinyl that will go on an automobile back window. I have a HP310 latex printer. I've gathered that the best way to make these decals stand out on a window is to make them white, but of course my printer does not print white ink. What's the next...
  13. Over Spray/Blurry print on black

    About a week ago my printer started to overspray or not print correctly in black (picture with the T look around the edges) I cleaned the printer really good. Now I have got some weird marks in blue, it almost looks like the rollers have ink on them. I cleaned the rollers and that is not the...
  14. Opinion Latex 850 - Current / Past Users

    Hello All, We are looking at purchasing a 2012 HP Latex 850. It has about 470k square feet printed on it. It looks to be in great condition and the seller had it decommissioned and ready to ship by HP techs. It's always a risk purchasing used equipment. We were lucky with our last purchase...
  15. FS: New in the box Mutoh ValueCut 1300 52" cutter with stand...

    We purchased this cutter as an add-on upgrade to a 1624x we bought at the start of the year, thinking we would use as a backup and to do overflow work. Due to space limitations and being too busy this year, we never installed it and is still in the original box and crate and now we have decided...
  16. First Time Printer Mutoh 1204

    Hello Folks, I recently picked up a used 1204 at a price I really couldn't pass up. I have been outsourcing my print jobs and I'm excited to start printing on my own. My question is, is there anything I should be looking for on the printer to make sure it is ok? I won't have the option to try...
  17. Mutoh Value Jet 1204

    About a week ago my printer started to overspray or not print correctly in black (picture with the T look around the edges) I cleaned the printer really good. Now I have got some weird marks in blue, it almost looks like the rollers have ink on them. I cleaned the rollers and that is not the...
  18. Humidifier?

    Hope I'm putting this in the right area. We need to better control the humidity levels in our shop for our uv printer (which is why I chose the 'flatbed printer' area for this post). We have a dehumidifier for when the humidity gets too high but then we have days like today where it's dipping...
  19. New Printer

    We are looking to buy a new flatbed printer for our business and I'm coming to all you experts for advice. Our main product is wood plaques that are 1/4" to up to 2" thick. The sizes on them will range from 12" x 12" up to 24" x 34". We sell wall decor that will have different sayings or...
  20. Running Thin Styrene Through A Roland Ecosol Printer?

    I have an expandable trade show booth that has 4 26.5" x 88" panels that are fastened by .5" magnetic strips. I would like to make some panels for it. The existing panels are really nice, with a super tough matte finish. Almost clear gravel guard looking. There are also slotted plastic hooks on...
Top