Recent content by Attila Nagy

You can Burn it to a DVD if you want or just open and extract the ISO file with 7zip or any software can manage ISO files.

Roland rollers are special. the inner diameters are smaller than the outer ones. the middle roller different it is straight. Make sure using the right ones and installed them correctly.

It is a common fault with Graphtec cutters. You can find a plate spring at the top of the carriage. It holds the 2 rollers. 3 screws hold the plate. Release the 2 screws at the sides, the spring will tighten the carriage. Gently secure back the screws. While tightening the screws back, make sure...

Does Not your Printer have Ethernet Port?

Special Items should show if a cutline on the artwork. there are 2 reasons for that. 1. there is no stroke coloured SPOT color named CutContour. in your artwork - Sed me your file. I can check it for you. 2. there is a Bug in VW5. might need to reinstall - Run VW5 setup as Administrator...

1. For serial connected cutter the handShake needs to setup correctly (HardWire) to avoid memory overflow. It could cause unfinished jobs. 2. There is a STEP SIZE setting in the cutter. You need to set the same in your cutting software. 0.025 mm/step = 1016 steps/inch PM me if need help with any...

It is all about tool Positions. Position 1 is the back slot, Position 3 is the front slot. check the condition you sending the job. Assign Tool option shows each condition setting,

They not support it does not mean cannot be used

192.168.1.25 0r either 192.168.1.100 are likely assigned by DHCP server, to other new connected Devices. could cause IP conflict in the future. Choosing higher number for the printer could make IP conflict unlikely. For ex. 192.168.1.241 , Narrowing the DHCP range in the router. Leaving safely...

Network does not need Driver. only valid IP setup.

The original remains, you can release the clipping mask any time. If you need multiple clippings, you need to have an other copy of the image.

Did not say What Software. In Flexi select Print Color Bands. Not sure how VersaWorks does it.

LCD and touch Screen are the weak part of S1. Summa only sells color S2 displays now, and for that need a S2 motherboard. Leaves S1 boards as spare. Should have spare S1 boards hanging around because of that, on the market. Good luck to find one. I am not in the US, cannot help with services.

Yes. many times. In old summa mainboards the Motorola processors as well.