Recent content by Bonzai901

Do you have pictures of the screen? I ran 2 FB700 for almost 10 years and there was a time when we had to reconfigure the Bios on the printer computer, technician recommended to replace the battery on the computer before doing all the work, I remember it was almost two pages of stuff, and we had...

You might wanna try promoter AP3155, not sure it will work on it but that is what we use for some clear acrylics

Before you do any install on wall graphics ask the customer what kind of paint they using and if is long/short term; go from there to choose the right vinyl for the job, usually for this kind of paint thin cast vinyl works better and it is tricky to install, I had a wall graphic on a basement...

I don't think it was car washed but could be that either the window perf vinyl, usually react more to the temperature, did the same person installed? what I found trough the years is to not apply any heat to the window perf when installing and also use 3M primer 64 with a cute-tip on the edges...

I been using 1.5" 3M Scotch #2020 for years, I usually get a 5 pack from either Home Depot or Lowe's

We have a colex router and had trouble with 18 and 24pt, ink was cracking and now we use T00826 1 Pt Wheel and now it doesn't crack anymore

Digitech TrueFire is fast and print high quality, got the option to get with a conveyor and a Colex router, ask them to give you at least a few profiles since we only got one profile for Caldera Rip

Gerber Mask is made for stencils, is a low tack vinyl, comes in white and blue

I remember last year our distributor said price going up on the 365 ink but not for the 800, not sure why

A lot of time failure is for lack of prepping, even if it doesn't looks like some of the glass got a oil on them if is not cleaned the vinyl won't adhere the way is supposed to, also window perf needs to be laminated for outdoor use for a longer lifespan of the print, if you don't want the...

one of the Yellow/Black printheads is bad, sometimes works by doing just a printhead cleaning but if it does drop again just replace it, it is recommended to replace printheads by pair

Looks like there’s a vacuum problem, I ran 2 FB700 for 12 years but never encountered this issue

It looks like the filter is clogged, possible from bad ink or just a bad hose on the new box of ink, how it did happened? can you see any ink dripping when purging? It could be the floater just giving it wrong reading, floater is inside the thermistor is a thin piece of glass and sometimes over...

I got some pictures here

I never ran a 560 only 360 and 800, for the looks on your video looks like a delayed printing some rips software have a setting that delays after every printing pass, check every window setting