I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Now that I recall I did print a few yards of brown before I calibrated. My imitation gold color and reds were all coming out lighter than my chart of just 2 months earlier as image shows. After the shake them up maneuver my charts matched the earlier chart and my grays were quite neutral. My...
I was having the same issue. My dealer (I should give a plug) Northlight Color suggested an incredible simple fix , but it worked!
Follow insructions for changing color cartridges and remove the cartridges and then gently shake them. Then calibrate....
I would have never believed this would fix...
I have a GK1, which stands for Gerber Kill 1. This company certainly did not kill Gerber but is one of the first software driven systems. 30 fonts yippe!
A pre-runner for what ended up Summa through Houston Instruments.
I use a HP L310 and a Summa Sign 1400 ( the older cutter). First of all the printer does not print such great clean edges! My older cutter has some sensitivity settings in it that make the cutter less fussy finding the marks. Mine is called OPOS SETTINGS in the internal tests under menu. Newer...
If one were to print (4) .119 inch squares spaced from the 4 corners of your print. This in my case is accomplished in Flexi Sign with step and repeat . Then create a contour cut file including the 4 corner squares.
In my case I use a Summa Cutter with the opos eye system. Then I use a cutting...
How wide are your marks? I have a summa sign T140 which should handle opos marks at least 53" or 1346mm across the width of the cutter. It seems like marks over 1300 mm do not read, yet if I use Summa Cutter Control and manually set the marks, then use special load setting on the cutter, then...
In the color setting box under rendering intent
I have set vector, text and gradient to no color correction for CMYK values.
This I believe this makes the printer print the percentage values you choose.
If you choose 100% that is what you should get.
I to have a 310 and I am very pleased with my...
I decided to try Graphic Finishing Partners calendared laminate. The finish is very nice but I noticed that it's initial tack is not very high. Has anyone been using this product for some time ?
I think Big Easy refereed to this, what happens if you digitize an upper case A and then use the design character command, then select arial , and select A for the character and then replace the uppercase A?
I have had some problems as well and I have found that the SSD on my system is the culprit in some of my issues. I would like to test the program on my E: Drive ( the conventional 1 TB drive) although Flexi 11 would not be located where all the other programs . Tech support has stated there may...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.