Recent content by congdesign

The printer name is xenon M3. When you turn on the UV printer, 5 beeps will continue to sound. If you look at the board, the light in that area will turn on when a beep sounds. They say it's an ink problem, but when you purge, ink comes out easily from the head. Which part could be the...

I'm using Epson Sure Color S60610, but ink is forming on the head. The nozzle and printing work well too. If the ink forms as shown in the video below and you print, only the first part will be inked on the paper pressing plate. Other than that, the output comes out without any problems. Is...

I am using F9340 with water-based ink. I am using Edge Printer rip & ergosoft rip I can't figure out if the alignment of the head is the problem or if the level of the machine is the problem. I can't help it even if I try all the different profiles. Is it possible to solve the problem? We need...

S60610 is I am using Edge Printer Lip. I downloaded the profile from the Edge Dashboard and tried it. The color value differs too much from the monitor. I can't help it even if I try all the different profiles. Is it possible to solve the problem? We need help from experts Thank you!!

thank you It really helped me a lot. As you said, the margin was the problem...T.T I'm using it right now, but... It is difficult to use a hybrid printer like a flatbed printer. I'll have to look into buying a new machine. T.T

I have a question about handtop uv hybrid print reverse function. The first 1 or 2 times worked fine, but when I try again The topjet program shuts down with an error. Forward output is fine, but if you turn on the reverse function and start output, an error occurs and the program ends...

It's my first time using Caldera Lip, so I'm not sure. I am testing it by adjusting the easy media-> profile -> ink limit limit. The amount of light from the lamp is sufficient, but the total amount of ink must go down to 60%. Curing is done well..

(caldera) I am curious about the caldera ink amount control and black color options. I am using handtop uv print. When printing, only the dark color does not harden slightly, so if you scratch it with your hand, it will smear a little. So I want to reduce the amount of ink a little... In...

Hello I'm using the epson f9340 model (epson edge print software). As in the picture, only the gradation part shows the unique part... Is it possible to solve this part? If you check the nozzle, there is no empty space... I cleaned all the machines neatly, but I can't solve that part... Is...

in caldera rip I want to adjust the amount of ink and the number of print passes... Which menu should I look at? I've tried many other lip programs, but I can't find it in Caldera rip...

in caldera rip I want to adjust the amount of ink and the number of print passes... Which menu should I look at? I've tried many other lip programs, but I can't find it in Caldera rip...

When printing, you want to change the number of output passes and the amount of ink. From which menu can I change it? I don't really use Caldera lip products in Korea Someone I know around me I don't have any T.T

It has been about 6 years since the machine was built. Could you please give me a link where I can download the manual? There is no manual..T.T

Opinions are also mixed... Ink & Lamp .. Ink has been discontinued, so it's an order to change anyway... It is difficult to replace the lamp. Is it okay to replace it with the same option with the same specifications? Or do I really need to use lamps of the same product?

The water in the pen and cooler circulates very nicely. Is changing the ink the first step? It's a big deal to replace the ink because the ink has been discontinued...