Recent content by Davis25r

Thanks for the reply, I was able to load up that pdf but have not yet gotten a chance to test it out. Letter D on step 5, pg 11 refers to quality. But I am going to assume that you mean the scale of the printed image needs to be set to 97%? I will give that a try in the coming days and get back...

Thanks for reaching out. It does not appear I have access to view this document. It gives me a “No access to rolanddga sharepoint” error.

I am looking for some assistance from you i1pro experts. I am trying to get my i1pro2 to connect to Versaworks. I have it connected via USB, with no issues. However, when I try to measure or calibrate I am greeted with “Error Code = 0” and nothing else happens. I have not been able to find...

So I had been printing the side bars just not in these photos (for whatever reason Flexi kept putting the right side right over top my registration marks, so I didnt print them in hopes that I would get good results and acrually be able to cut). When I did use the side bars, they looked fine...

So I went ahead and changed the 18 to 100% Cyan, as well as did a print of just Cyan bars, with and without empty spaces of white between them. Both prints were done with 12P UniDir High Ink. The test with just the cyan bars doesnt seem to show any banding. However, I do notice that the Cyan...

Now thats an interesting take, and I agree with it. It is not 100% cyan on that number, but I am going to test that on here a few and see if what you said is correct. Now assuming thats the case, why would this be so consistent even with different heads? My nozzle tests come out okay, but this...

So after spending yesterday and this morning doing some more playing around, here is what I came up with. I changed some more printheads, I also changed out my ink, and redid some profiles. I also cleaned all the PH contacts. The issue is only prevelant in the lighter shades of blue. Going to...

So I tried a combination of 5 different heads so far, I have labeled as such. All 5 sets show nearly identical results. I labeled them as A,B,C,D,E Now if its any indication, I ran about a 40 inch piece after I posted this last night. After the run, I got an error "Reseat C/LC Printhead 2". I...

Good evening all, I have an issue here and I am stumped. Im getting this strange banding like deal in my L/LC on my L26500. Ive put (2) seperate sets of heads in, and still the same problem. Ive cleaned the OMAS sensor, both manual, and automatic head alignments, cleaned the line sensor...

Morning all, Earlier this year I got my hands on an i1 pro for doing my own profiles, which has been awesome. However, it didn't come with the scanning ruler so I have been making it work less pleasantly. Does anyone have an idea if I can get one anywhere? Even a knockoff would be fine. Ive...

I'll order a roll and give it a try. Much of a difference with the 3755 vs the 2755 besides is being 1mil thicker? Still pairing it with the PL-3150?

Good evening all, As the title says, I am looking for everyones recommendation on some good material for doing unlaminated work. I have a L26500 and mainly do work in the motorsports realm and laminate everything. But I do get those jobs where laminate is overkill and not needed. I primarily...

Good evening all, Looking for some guidance, I am currently running Flexi 10.5 (old I know, but I got it with my printer and I have no issues with it.) I have read alot of comments on here about people using the x-rite i1 Pro series spectrophotometers with this version of flexi with no issue...

Awesome response, I was unaware of thr EOL and +5 years deal. I knew the 300 series was released a few years ago but was unsure of HPs lifespan on certain series lines.

Good morning all, Looking to upgrade my printer here in the next few months. I got ahold of a L210 right before they were discontinued, it has been treating me well but you never know when its gunna bite the dust. I have had my eye on a L335 or L365, but do not want to get myself in the same...