Recent content by jbennett

No distortion, banding, or noise. Printer is virtually new.

When printing on my newer 1641, longer prints like 8-10 ft come up nearly an inch short in the page feed direction, but are perfect in the carriage direction. I have went through the PF adjustment and it was a tad off, but once corrected, it still comes up short on longer prints. Printing out of...

Turned out being the CR board and Mainboard having to be replaced together. No more E152 now. My issue now is that the ink is draining straight through to the waste tank if I don't take cartridges out on basically all colors. The printer didn't print for nearly 2 months because of the E152 error...

Mine turned out being the CR board and Mainboard having to be replaced together. No more E152 now. My issue now is that the ink is draining straight through to the waste tank if I don't take cartridges out on basically all colors. The printer didn't print for nearly 2 months because of the E152...

Printer had been printing great, then out of nowhere I went to take it out of sleep mode and saw some garbled readout on LCD instead of what should be there,. Powered the printer off and back on and No LCD readout initially but error light would light when powered on. Tried turning on and off a...

I know this is an old post, but I am having the same issue and would really benefit from knowing what the final fix for the 152 error was in this case. I have tried new CR board and still get the same error. It just started doing this out of the blue. Any help would be very much appreciated.

Yeah I think I will try making one. Have an xrite. May call mutoh too. Not much out there for a 1628x

None of my 1628x profiles print right with flexi. Have been using onyx but with the version 21 of flexi I can now use spot colors for the 4 channels opposite the cmyk and I dearly want to get all my stuff back printing in Flexi. Using Ecosolvent ink and midgrade stuff like 3165 and IJ35. All...

Thanks, I think I have that part down. How do you adjust the tension on the knobs that are sideways on the laminate and take-up rolls? The white ones with springs under them. Im thinking the silvering is because i don't have those set right maybe?? Any ideas? jbennett

I have a US TECH Master Worf Master tech Master whatever they call it this week Laminator. Looks like all of the US support has disappeared from the net. I have started laminating 60" material with it, first using the Fellers Lamex and secondly 3M 8508. Im not sure I have everything set up...

I'm about to build around a 4' x 16' work table. Anyone that wants to show off ones they have that they love and provide some ideas/inspiration, I sure would appreciate it. jbennett

Recently bought a used, but like new AK-600. USTech, Master Worf, Master Laminator, etc.... (A lot of names on it). It is a heavy built machine and hopefully will be better than my old Daige solo. Questions: Does there exist any written paperwork on setting the tension (shafts and rollers) and...

Close to a year later and still hate this Vinyl Express Q42 with a passion. I can't get it to read the first mark about 85% of the time. Once it reads the first mark it never has a problem with any of the others. No big complaints on contour cutting accuracy now. I have darkened reg marks. Tried...

Yes, I realize that. I used that on my old 1204 for years and loved it, best looking prints of any Ive had (probably was way overkill on ink though). I tried the Arlon last night and I liked it a lot too. Problem now is with the latest Flexi production manager isnt showing my presets in the...

Thanks DSD. Do you like the quality 4 profile better because of quality compared to graphics 2? I am going to try the Arlon 6000XRp profile. On the 1204 I used a quality 4 that was a 3165 Oracal profile that would work well in Graphics 2 mode (even though i got the little caution triangle). It...