I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Im up to 767 hours on my fb 700. I just turned up uv lamp power when i noticed on some substrates that the ink felt sticky so to speak. That was the first sign the lamps were losing its curing power. So Far i haven't had any other issues curing wise. I do periodically scratch the edges of some...
The banding typically happens on either indoor signage plus our outdoor signage plus. Depending on the substrate it can barely be seen or its visible quite clearly.
Our FB700 is creating strange "vertical banding" that runs the direction of the media path and not in the typical direction of the printhead. This banding seems to be more of a streaky halo effect and is not perfectly uniform the entire length. We have had our tech out to solve the problem but...
I had a few questions regarding a latex printer. We have a Scitex xl 1500 that we run. We are thinking of upgrading because we've heard a lot about a latex printer. Can anyone give some insight as to the pros and cons of this machine and whats its capable of doing. I on a personal level would...
I am using an HP FB700 and for some reason when I print the second side, the image always shifts 1/4" or more. So I reprint again and try to change the margins to compensate for the shift. Each time has a different result. Anyone have a clue?
Does anyone know how to calibrate this machine. Ive done it but I think i may still be missing a step here or there. Especially after doing the L/R cyan Adjustment.
Also does anyone have a similar problem were the machine just stalls out. I just starts to purge right down the middle of our...
I can do everything else with the Zund, but when it comes to engraving on Rowmark, I can't get the Zund to do a smooth engrave without the cutter having to run for over an hour. This is even for small pieces that are only 1"x3".
Any help that you may have would be greatly appreciated
I run the hp 700 flatbed. Lately I've been getting the error the it detects no current and i have to reset this warning. We've only had this machine about 3 weeks. Ive checked under the maintenance to see were the uv lamp usage is at. I am currently at 250(of500). Does anyone else have this...
Hp fb 700
Does anyone know how to print to any substrate with bleed. I am using the caldera to rip my work. The hp wants to clip my image to fit substrate. Anyones help would be greatly appreciated.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.