Recent content by naminexnobody

I wanted to come on here and see if anyone could provide any insight on the issue I’m having. The printer will sometimes just stop in the middle of printing a job and will sometimes print mis colored. Test prints are good, checked the heads and found nothing out of the ordinary. I added a pic...

Thanks! Will give this a try before contacting our tech!

Hey guys! I work for a sticker printing business and was looking to expand some things that we offer. I’m in desperate search of a manufacturer or supplier that has transparent holographic/holographic designed permanent adhesive pvc laminate rolls would prefer 60 inches but close to it is...

Hey all! The problems seem to never stop lol So I’m finding that my cyan print head is forming droplets of ink on the head itself from ink leaking, it is getting on the vinyl as well as the the media guards. We JUST had our print head replaced and have been keeping up with cleaning and...

W We currently use the graphtec branded CB15UA blades. The blade type is correct in the machine settings but I will have to double check our offset

I will give this a try! but I did take one of the blade holders (with a new blade) from one of our other machines that is cutting great and when I put that holder in the machine that I am talking about the problem persists. I was thinking the same thing that you said in the second paragraph...

We use versa works! files are set up in illustrator and exported as pdfs then I load them in there. this is how our strip looks. Don’t know the correct terminology but I would say that is cutting into the trough because of the blade holder placement.

Sorry meant to say plotter not printer!

Sorry for reposting but I’m not sure if I posted my previous one in the right area so I’ll try posting it again here… Hello everyone! I have frequented this forum for sometime as a non-member but I have run into some problems with one of my graphtec FC9000 plotters at work and figured it was...

Hello everyone! I have frequented this forum for sometime as a non-member but I have run into some problems with one of my graphtec FC9000 plotters at work and figured it was time I joined so I can get in here. I have been printing here for roughly 6 months and have minimal experience with our...