I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
What is the best way to sell some roll of laminates and vinyls?
We acquired thru a large sign shop that went out of business and don't use these particular ones.
We have about 50 rolls of various items. Most are new, never used.
Would the member to member classified forum be the way to go? Any...
never applied anything this big before with overlap parts.
OK - dry it is.
Just start from the top and work down.
If not straight pull up and rework...
Any final tips on installing graphics to a metal surface 20ft wide x 10ft tall?
We are using 3MIJ180C-10 With 8518 Lamination.
I made vinyl panels that are approx. 40'' wide x 10ft tall.
I have about 1/2'' overlap built in.
Not too much in the way of lining up art graphics from panel to panel...
We are getting a new printer in the next couple of weeks. We are still going to use our old Falcon Outdoor Jr. But with the new printer we are getting Windows 7 update (from XP) and moving to Flexi 10.
Will the Falcon Outdoor Jr. work with both of these? (Windows 7 & Flexi 10) Any special...
When printing, we are getting a greenish tint to "picture" raster file on the black portions. Everything else is printing fine. Is there some setting that was changed in our flexi or print management scheme that is messing this up?
Is there some RGB setting that was changed, or needs changed...
Anyone know of double-sided foam tape (or vhb) that can be applied in cold weather? Most tapes have recommended mounting temp. of 50-60 degrees.
Thanks!
Brent
By "filling up" I am meaning through the pump/ink fill. method.
So are you saying to do a ink line/damper swap with a working color?
If this is done, would that contaminate the dampers?
FYI - When i try to manually pull ink through waste lines using syringe, i have a tight seal and can pull...
Mutoh Falcon Outdoor 48'' Printer - We were having problems with cross contamination (yellow) so we installed a new Maintainance Assembly.
Once installed, we were still get some contamination, so we were told to try to flush the system out and do ink fill to make sure no ink in the lines...
So I just changed out the maintenance assembly on our Falcon Outdoor - Mutoh and got put back together. Was going to do a "reset home position" test but it won't work. I can get it to where you push media and the printhead should move around, but it doens't move. Sounds like it is going to move...
I am looking to hang some larger signs on a 2 3/8' round steel post. I can get the standard double sided brackets that extend out about 3 or 4 inches, but does anyone know where I could get doubel sided brackets that extend out further so the sign is more stable? Sign is about 24'' wide, made of...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.