I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Well its somewhat random. Most of the time its somewhere in the middle part of the table (I would say mostly third mark up from the left side or just before the camera should move back to the right ) - very very rarely lower marks. Also it pretty much never happens when I start to cut - it...
Hi
The local Summa support also suggested to turn the segmentation margin off. Turning it off actually made the thing worse. Today had again same problems and nothing helped until turned the vacuum off, moved the job little bit backwards and ran the damn thing again and worked like charm. So...
Hi
Yes I have given it extra space and the problems occurs less often in that case. I'm just worrided that since the media size is primarly meant for vacuum then it will suck too much air at side and the vacuum will be weaker :rolleyes:
Hi.
So as the title says I'm getting this error from time to time and it drives me nuts. So I put sheet on the table nice and straight - both back and front nicely even from origin side etc. I show the origin and media size with axis control etc. Then when I start to cut it randomly stops at...
Hello everyone.
We have a summa F1612 for cutting reflective sheeting for signs and we also have a regular router for milling thinner PVC etc. The problem we have is that the cutting and also milling depth is inconsistant. What I mean by that is when doing through cut or milling the first...
Hey guys.
So we have a Summa S2T160 plotter with OPOS (not cam) and we also have multiple problems. I pretty sure that here's lot of guys who can' help me out and give some tips on these.
The first problem is that the OPOS cannot detect the cutmarks on reflective media like Avery...
Well thats exactly what I wan't to do since the aluminum sign bases are also made so that radius changes with scaling or proportionally the printed sign thats gonna be applied to it has to do also. So now I have loads of signs in corel and eventually I would like to convert them all to flexi so...
Okay, gonna check it out tomorrow if theres something in the left corner. I suppose that selecting image, right clicking and seeing an option to "convert to curves" doesn't mean that the whole image is not yet curves? Also one thing what I just don't understand is that if I create rectangle then...
Well my problem seems to be that if I select the sign the corner options and the tab to "relative corner scalind is not there". If I draw a rectangular shape then it is there. So theres some hidden flag with the sign that I need to disable or do or somh but what could it be?
I'm using both corel and flexi - I would prefer at one point for everything to be converted into flexi so we have designing-printing and cutting all in one software. All an all it seems that Corel. Flexi, Ai are all very similar - in flexi you can even select your worktoom type to be like one of...
Hi there.
So I'm a complete newbie and completely stuck. So basically we started to do our own traffic signs and I'm stuck right away with the "give way" sign. We have 4 size groups for triangle shaped signs (give way and all the warning ones) and I thought that once we have a sign its just...
Does the one with opos camera work reliably? We were now offered a cam upgrade for 2 grand and we would probably take also pinch rollers media kit to add more rollers since with really thick material it tends to slip even with slow speeds. Ofcourse we were also offered a generous deal on F...
Tried it but it doesn't work. Basically value on unprinted area (white) is pretty much the same as value on printed black area - after scanning it says on screen that it doesn't work. Tried scotch taping over the regmarks - it kinda works but at some marks I have to add like 2-3 layers so its...
So the problem is that in flexidesign the cut contour option ( the one next to print - the little blade tip one) is greyed out - it doesn't matter if I have created an object with cut contours added and selected. At the same time if I create print job and print and cut with production manager it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.